Annual Routine Maintenance on Your Steel Buildings

Most buildings across the country require some form of maintenance to keep them operating in good condition. The type and extent of this maintenance depends on the materials. For a steel building Arizona, these structures have very low maintenance requirements. It’s one of many reasons why people select this material for sheds, garages, workshops, commercial buildings and other operations. Here at Bunger Steel, we provide custom engineered metal buildings. Learn more about the basic upkeep for these buildings.

Maintenance for Steel Buildings

Develop a maintenance checklist that can help you perform the annual routine maintenance. Many maintenance tasks may be done at certain times of the year. With a checklist, it ensures that each step will not be missed or forgotten.

Perform Annual Inspection

An annual inspection allows you to look over the stability of the building and address any issues immediately. It’s often ideal to perform two inspections a year, such as in the spring and fall. However, at least do one visual inspection along the inside and outside of the building each year. You can evaluate for storm damage, shifting foundations, damaged panels, and other issues.

Wash the Building

When you leave dirt and grime on steel panels, the panels can become stained. The grime starts to deteriorate the protective surface, eventually corroding the metal. Wash the steel building Arizona using spray washers and industrial cleaning products. You can use a soft-bristle brush to clean off very dirty areas.

Replace and Tighten Missing Screws

Metal building materials contract and expand based on settlement and the weather. This movement can loosen screws. You want to tighten these screws and replace missing screws along the panels.

Clean Gutters If Applicable

If the steel buildings have gutters, branches, old leaves, and other debris can clog the system. Clean the gutters right before winter after the last leaves fall from the trees. Tighten fastenings and repair any damaged gutters at this time.

Inspect Foundations

If your steel building doesn’t have gutters, inspect the foundation. You want to look for areas of pooling water that could get inside or damage panels. You may need to perform work to drain the water, such as adding in sump pumps or grading the yard. Also, inspect the panels for shifting.

Replace Damaged Insulation

Steel buildings with insulation can become moldy from water or damaged from pests. You want to address the issues causing insulation damage. Then add more insulation to create a protective barrier.

Oil Door Hinges

Standard doors and overhead doors have moving parts to allow for entry. Oil the door hinges, whether mechanical or automatic, to ensure smooth operation.

With proper maintenance, your steel building Arizona can last for decades. Whether you are doing the maintenance, or have a maintenance crew, also make a report about any work that’s performed. You want to track any anomalies that could indicate more serious issues. Learn more about how Bunger Steel can develop and install the steel building that you need.

Get a Quote

Thank you for your interest in Bunger Steel. Our staff is available to help answer your questions and guide you on the steps needed to proceed with a steel project. Complete the form with the required information to receive a free estimate from a sales representative.

To speak with a sales representative, call 1-800-3-BUNGER or email sales@bungersteel.com.

  • See Popular Sizes
  • This field is for validation purposes and should be left unchanged.